1 rohs peak wave solder temperature rating 260c suitable for cat 5 & 6 fast ethernet cable or better utp meets or exceeds ieee 802.3 standard for 100base-tx 350 h minimum ocl with 8ma bias current minimum 1500vrms isolation per ieee 802.3 requirement usa 858 674 8100 germany 49 7032 7806 0 singapore 65 6287 8998 shanghai 86 21 62787060 china 86 755 33966678 taiwan 886 3 4356768 features and benefts: electrical performance summary: mating force unmating force plug to jack part number (max) (max) durability retention (min) j0 series 5 lbs./2.268 kgs. 5 lbs./2.268 kgs. 750 insertions 20 lbs./9.072 kgs. rj45 durability testing rating part shield contact housing msl 3 number material finish material plating area solder area 2 material specification rating j0 10-20m inches nickel over phosphor nickel underplating and 120 inches sn100 series brass 10-20m inches brass bronze selective gold plating 15 inches over 50 inches nickel thermoplastic ul 94 v-0 1 rj45 material specification electrical specifications @ 25c operating temperature 0c to +70c insertion return loss common mode rohs compliant turns mech. emi leds 1 loss (db typ) crosstalk rejection hipot part number ratios drawing fingers (l/r) (db typ) 100w 15w (db typ) (db typ) (vdc) tx rx 1-65 1-10 10-30 30-60 60-80 1-30 30-60 60-100 1-50 50-150 mhz mhz mhz mhz mhz mhz mhz mhz mhz mhz 1 min j0006d01bnl 1ct:1 1ct:1 a no g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0006d21nl 1ct:1 1ct:1 d yes n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0006d21bnl 1ct:1 1ct:1 b yes g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0011d01nl 1ct:1 1ct:1 c no n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0011d01bnl 1ct:1 1ct:1 a no g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0011d21nl 1ct:1 1ct:1 d yes n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0011d21bnl 1ct:1 1ct:1 b yes g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0011d21enl 1ct:1 1ct:1 b yes g/g -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0012d21nl 1ct:1 1ct:1 d yes n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0018d21nl 1ct:1.414 1ct:1 d yes n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0018d21enl 1ct:1.414 1ct:1 b yes g/g -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d01nl 1ct:1 1ct:1 c no n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d01bnl 1ct:1 1ct:1 a no g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d01enl 1ct:1 1ct:1 a no g/g -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d21nl 1ct:1 1ct:1 d yes n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d21bnl 1ct:1 1ct:1 b yes g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d21enl 1ct:1 1ct:1 b yes g/g -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d21fnl 1ct:1 1ct:1 b yes g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j0026d21gnl 1ct:1 1ct:1 b yes yg/g -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j00-0014nl 1ct:1 1ct:1 c no n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j00-0045nl 1ct:1 1ct:1 a no g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j00-0061nl 1ct:1 1ct:1 f yes n/a -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 j00-0065nl 1ct:1 1ct:1 e yes g/y -1 -20 -16 -12 -10 -40 -35 -30 -30 -20 2250 notes: 1. connector dimensions comply with fcc dimension requirements. 3. msl = moisture sensitivity level rating from 1 to 5 (highest = 1, lowest = 5) 2. rohs parts are tin matte fnish over nickel. notes: 1. leds left/right: g=green, y=yellow, n/a=none, yg=bi-color led yellow green. 2. leds with internal resistor. 3. bi-color left led. description: 100 base-tx (fast ethernet) rj45 1x1 tab-down with leds 8-pin (j0 series) intergrated magnetics connector (icm), designed to support applications, such as soho (adsl modems), lan-on-mother - board (lom), hub and switches. j0006d21bnl shown 2 3 J403.k (08/12) pulseelectronics.com pulsejack? 1x1 tab-down rj45
2 a j0 series mechanicals b dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 J403.k (08/12) pulseelectronics.com pulsejack? 1x1 tab-down rj45
3 c j0 series mechanicals (continued) d dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 J403.k (08/12) pulseelectronics.com pulsejack? 1x1 tab-down rj45
4 dimensions: inches mm unless otherwise specified, all tolerances are .010 0,25 e j0 series mechanicals (continued) front view side view view from pcb component side f J403.k (08/12) pulseelectronics.com pulsejack? 1x1 tab-down rj45
5
j0006 j0011/j00-0014nl/45nl/61nl/65nl j0012 j0018 j0 series electrical schematics j0026
J403.k (08/12) pulseelectronics.com pulsejack? 1x1 tab-down rj45
6 for more information pulse worldwide headquarters 12220 world trade drive san diego, ca 92128 u.s.a. tel: 858 674 8100 pulse europe einsteinstrasse 1 d-71083 herren - berg germany tel: 49 7032 7806 pulse china headquarters b402, shenzhen academy of aerospace technol - ogy bldg. 10th kejinan road high-tech zone nanshan district shenzen, pr china 518057 pulse north china room 2704/2705 super ocean finance ctr. 2067 yan an road west shanghai 200336 china pulse south asia 135 joo seng road #03-02 pm industrial bldg. singapore 368363 tel: 65 6287 8998 fax: 65 6287 8998 pulse north asia 3f, no. 198 zhongyuan road zhongli city taoyuan county 320 taiwan r. o. c. tel: 886 3 4356768 fax: 886 3 4356823 (pulse) performance warranty of products ofered on this data sheet is limited to the parameters specifed. data is subject to change without notice. other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. ? copyright, 2012. pulse electronics, inc. all rights reserved. yellow 585 nm 2.5 v 2.1 v green 565 nm 2.5 v 2.2 standard led wavelength forward* v(max) (typ) * using an internal resistor within the led increases the voltage rating of the diode from 2.5 v to 5.0 v (assumes bias current = 20 ma). led confguration pulseelectronics.com pulsejack? 1x1 tab-down rj45 J403.k (08/12)
|
